Revisar el paquete de liberación
We review the 3D model, drawing revision, quantity breakpoints and critical-to-function features before selecting the routing.
Del prototipo a producción
Mecanizado CNC de bajo volumen para producción controlada
HDProto fabrica lotes pequeños cuando el proyecto necesita más control que un prototipo único y más flexibilidad que un programa de utillaje.
Solicitar presupuestoWhen this service is the right fit
Es adecuado cuando el diseño se estabiliza, la demanda es incierta o se necesitan piezas representativas antes de decidir el utillaje.
Project support
- ✓Lotes de prototipo, piloto y producción puente
- ✓Fresado, torneado y acabados coordinados en un solo plano
- ✓Inspección de primera pieza y características críticas
- ✓Trazabilidad de revisiones y acabados aprobados
Manufacturing route
How we plan the work
Planificar la repetibilidad
Datums, workholding, tool access and inspection points are set up for stable repeat batches rather than a one-time prototype shortcut.
Mecanizar y verificar
Parts are made in the required material and finish, with dimensional checks focused on the interfaces that affect assembly performance.
Aplicar los aprendizajes al siguiente lote
Approved process notes and quality requirements stay attached to the job so a repeat order starts from controlled information.
¿Qué cambia entre un prototipo y un lote pequeño?
Una revisión de plano y criterios de aceptación claros mantienen controlado cada lote repetido.
Las caras de sellado, ajustes a presión, roscas y superficies visibles deben marcarse como críticas desde el inicio.
Las cantidades, entregas parciales y acabados deben cotizarse juntas.
Representative CNC-machined component photograph. It illustrates manufacturing detail only; it does not identify a customer program.
Application decisions
Details that make the page actionable
Validation builds with production-representative interfaces
For UAV and robotic assemblies, an early CNC batch can validate hole position, bearing or fastener interfaces, cable clearance and finish coverage before a repeat order. The key is to identify what is being validated and preserve that drawing revision.
Repeat batches without reopening settled decisions
After an approved first batch, the useful handoff is more than the CAD file: it includes material, finish, datums, inspection focus and packaging. That controlled package reduces avoidable rework when demand returns in smaller releases.
Quantities that justify process discipline
Even a modest lot needs stable workholding and a defined inspection approach when parts mate across an assembly. This differs from a one-off demonstration part, where speed may be the only decision driver.
Engineering decision matrix
What to decide before the RFQ is released
These are the inputs that change process routing, inspection effort and the usefulness of the completed part. They are not universal specifications; the drawing and service environment remain the source of acceptance requirements.
| Decision | What to review | Risk if omitted | Useful RFQ input |
|---|---|---|---|
| Quantity and release pattern | Compare the first release, expected repeat quantity and any scheduled delivery splits. | Quoting only the first small lot can hide the workholding and finishing decisions needed for the next release. | State quantity now, expected annual demand and whether releases must be split. |
| Revision control | Confirm the approved CAD and drawing revision before programming is carried forward. | A repeat order built from an informal model update can mix incompatible interfaces or finishes. | Provide revision identifiers and a clear disposition for any prior parts. |
| Inspection level | Separate fit-critical dimensions from general dimensions and define report expectations. | Inspecting everything adds cost; inspecting too little can miss the features that stop assembly. | Mark critical features, gauges or CMM needs, and first-article requirements. |
| Finish and packaging | Plan coating lead time, masking, cosmetic zones and protection alongside machining. | A stable machined part can still be delayed or damaged after a finish operation. | Include finish specification, masked areas and packaging or handling requirements. |
Frequently asked questions
¿Qué cantidades se consideran producción de bajo volumen?
The right process depends on geometry and repeat demand rather than a fixed number. Low-volume work commonly covers pilot, bridge and repeat batches where CNC flexibility is more valuable than dedicated tooling.
¿Puede el primer lote validar la producción?
Yes. Specify the assembly interfaces, material certification and inspection evidence required so the batch is planned as a validation build rather than a cosmetic prototype.
¿Cómo se mantienen consistentes los pedidos repetidos?
Use an approved drawing revision, material and finish specification, and clearly identified critical dimensions. Those controlled requirements form the basis for subsequent lots.