Freigabepaket prüfen
The drawing should name a specific grade and, where relevant, a material condition. Corrosion exposure and weld or heat exposure can change the right choice.
Edelstahl-Komponenten
CNC-Edelstahlteile für anspruchsvolle Umgebungen
HDProto fertigt Edelstahlteile, bei denen Korrosionsbeständigkeit, Sauberkeit, Festigkeit und kontrollierte Schnittstellen wichtig sind.
Angebot anfordernWhen this service is the right fit
Diese Lösung passt für Teile mit Reinigungs-, Korrosions- oder Festigkeitsanforderungen, die durch Zeichnung und Prüfplan abgesichert werden müssen.
Project support
- ✓Prototyp-, Pilot- und Kleinserien
- ✓Fräsen, Drehen und Nachbearbeitung aus einem Zeichnungspaket
- ✓Erstmuster- und Merkmalprüfung
- ✓Rückverfolgbarkeit für freigegebene Revisionen
Manufacturing route
How we plan the work
Wiederholbarkeit planen
Stainless machining needs a stable setup and suitable tool path to protect edge quality, feature location and surface condition.
Fertigen und prüfen
Bores, sealing faces, threaded ports and mating surfaces are sequenced to maintain the relationships that determine assembly fit.
Erkenntnisse in die nächste Serie übernehmen
Passivation or polishing requirements are coordinated with dimensional checks so the final part—not only the pre-finish part—meets the drawing intent.
Edelstahlteile nach Einsatzbedingung planen
Eine klare Zeichnungsrevision und Abnahmekriterien halten jede Wiederholserie unter Kontrolle.
Dichtflächen, Presssitze, Gewinde und Sichtflächen sollten früh als kritische Merkmale markiert werden.
Menge, Lieferaufteilung und Oberflächenfinish müssen gemeinsam kalkuliert werden.
Representative CNC-machined component photograph. It illustrates manufacturing detail only; it does not identify a customer program.
Application decisions
Details that make the page actionable
Sensor, UAV and outdoor assemblies
A stainless bracket or housing may need corrosion resistance, controlled fastener interfaces and a finish appropriate for outdoor exposure. Confirm the actual environment instead of assuming any stainless grade provides the same margin.
Cleanable and fluid-contact components
For parts that see cleaning cycles or process fluids, define the medium, temperature, crevice risks and finish-sensitive surfaces. These inputs guide grade, machining sequence and post-machining treatment.
Interfaces that must remain stable after finishing
Threads, bores, seal lands and precision faces should be evaluated after the required finish. Treat passivation or polishing as part of the completed-part acceptance plan.
Engineering decision matrix
What to decide before the RFQ is released
These are the inputs that change process routing, inspection effort and the usefulness of the completed part. They are not universal specifications; the drawing and service environment remain the source of acceptance requirements.
| Decision | What to review | Risk if omitted | Useful RFQ input |
|---|---|---|---|
| Service environment | Consider moisture, chlorides, process fluids, cleaning chemicals and operating temperature together. | Choosing a grade from a generic corrosion label can overlook crevice or chemical exposure. | Describe the medium, temperature range, cleaning cycle and any corrosion concern. |
| Grade and material condition | Select a specific stainless grade and state traceability needs where applicable. | “Stainless steel” is not enough to establish corrosion performance, machinability or material documentation. | Name grade, condition, approved alternate and certificate requirement. |
| Functional surface route | Sequence bores, seal faces, threads and mating faces around machining and finishing. | A finish that improves cleanability may affect a close fit if it is not in the acceptance plan. | Identify surface finish, passivation or polish requirements and the dimensions checked after finishing. |
| Inspection method | Match the gauge or measurement method to the real interface. | Visual finish checks do not verify a sealing face, bore relationship or thread fit. | Call out critical datums, bore/thread gauges and required inspection records. |
Frequently asked questions
Welche Mengen gelten als Kleinserie?
Yes. Milling, turning, drilling and threading can be planned with passivation, polishing or other specified finishing steps for the completed component.
Kann die erste Serie zur Produktionsvalidierung dienen?
At minimum, name the grade, drawing revision, critical dimensions, thread or bore requirements, surface finish, quantity and any material or inspection documentation.
Wie bleiben Folgeaufträge konsistent?
Yes, provided the fit, datum scheme and inspection method are clearly defined. Thermal behavior, finish and mating material should be considered for functional assemblies.